MacDon CA20 Operators Manual - Manual (Page 95)

MAINTENANCE/SERVICE
Form 169009 93 Model Year - 2009
Adapter Serial No._______________
Combine this record with the record in the Header Operator’s Manual.
Refer to Section 8, Maintenance/Service for details on each maintenance procedure.
Copy this page to continue record.
ACTION: 9 - Check 6 - Lubricate S - Change
Hour Meter
Reading
Date
Serviced By
MA
IN
TEN
ANC
E
RECO
R
D
BREAK-IN Refer to Section 7.2, Break-In Period” for checklist.
10 HOURS OR DAILY
9 Hydraulic Hoses & Lines
25 HOURS
9 Hydraulic Oil Level
NOTE: A RECORD OF DAILY MAINTENANCE IS NOT NORMALLY
REQUIRED BUT IS AT THE OWNER/OPERATOR’S DISCRETION.
50 HOURS
6 Feed Draper Roller Bearings
6 Drive-line Universals
6 Drive-line Splines
6 Float Spring Tensioners
100 HOURS OR ANNUALLY
6 Auger Bearings
6 Auger Drive Chain
6 Auger Drive-shaft Bearings
6 Anti-Vibration Pivots
6 Float Spring Tensioners
6 Drive-line Guard
6 Float Pivots
6 Hydraulic Couplers
9 Gearbox Lubricant Level
9 Auger to Pan and Draper Clearance
250 HOURS OR 3 YEARS
6 Auger Pivots
S Hydraulic Oil Filter
1500 HOURS OR 3 YEARS
S Hydraulic Oil
S Gearbox Lubricant