Danger – MacDon CA20 Operators Manual User Manual
Page 8
SAFETY
Form 169009
6
Model Year - 2009
• Stop engine and remove key from
ignition before leaving operator's seat
for any reason. A child or even a pet
could engage an idling machine.
• Keep the area used for servicing
machinery clean and dry. Wet or oily
floors are slippery. Wet spots can be
dangerous when working with electrical
equipment. Be sure all electrical outlets
and tools are properly grounded.
• Use adequate light for the job at hand.
• Keep machinery clean. Straw and chaff
on a hot engine are a fire hazard. Do not
allow oil or grease to accumulate on
service platforms, ladders or controls.
Clean machines before storage.
• Never use gasoline, naphtha or any
volatile material for cleaning purposes.
These materials may be toxic and/or
flammable.
• When storing machinery, cover sharp or
extending components to prevent injury
from accidental contact.
2.5 HEADER LIFT CYLINDER LOCK-
OUTS - COMBINE
DANGER
To avoid bodily injury or death from fall of
raised machine, always engage lift cylinder
stops before going under header for any
reason. See your Combine Operator’s
Manual for instructions for use and storage
of header lift cylinder stops.