MacDon CA20 Operators Manual - Manual (Page 10)

SPECIFICATIONS
Form 169009 8 Model Year - 2009
4 SPECIFICATIONS
OVERALL SPECIFICATION
Width 151 inches (3835 mm)
Length 70 inches (1778 mm)
Height 50 inches (1270 mm)
Weight 2000 lb (907 kg)
MAIN DRIVE
1.8-2.7 in. 3 (29.5-44.2 cc) Piston Pump
Combine Driven
1.01 in. 3 (16.5 cc) Gear Pump
Gearbox Capacity 5 Pints (2.5 liters)
AUGER
Drive Chain
Type
Auger – 14 inches (356 mm) with
4 inch (102 mm) Flighting
Speed 150 rpm (Combine Dependent)
FEED DRAPER
Drive Hydraulic Motor from Combine Driven Pump
Type
Self-Tracking Rubber Coated Polyester Fabric With Rubber
Slats.
Width 78.7 inches (2000 mm)
Speed 350-400 ft/min (107-122 meters/min)
HYDRAULICS
Reservoir Capacity 16 U.S. gal (60 liters)
Max Operating Pressure
3000 psi (20684 kPa) Piston Pump
3700 psi (25510 kPa) Gear Pump
Filter 10 micron #151975
HEADER DRIVES
Drapers Hydraulic from Adapter Gear Pump
Reel Hydraulic from Combine Oil Supply
Sickle Hydraulic from Adapter Piston Pump
HEADER FLOTATION
7-8 Inches (178-203 mm) Vertical
4 Degrees Rotation
HEADER ANGLE CONTROL
Center Link
Mechanical or Hydraulic From Combine Oil Supply, With
Solenoid Valve To Toggle To Reel Fore-Aft/Header Tilt.
COMBINE REQUIREMENTS
Class 5 or Higher
NOTES: 1. Specifications and design are subject to change without notice or obligation to revise
previously sold units.
2. Weights do not include options.