Lenze SCD Series User Manual
Page 84
81
B.6
DESCRIPTION OF DEVICENET
TM
PARAMETERS
Parameter ID 40 to 130 (AC Tech parameters 1 to 90) have been described in detail in Section 15.0 -
DESCRIPTION OF PARAMETERS.
DNET Par. ID 1 - OUTPUT FREQUENCY (READ ONLY): Actual output frequency to motor (0.1
Hz resolution).
DNET Par. ID 2 - OUTPUT VOLTAGE (READ ONLY): Actual output voltage to the motor (1 Volt
resolution).
DNET Par. ID 3 - OUTPUT CURRENT (READ ONLY): Output current to the motor (0.1 Amp
resolution).
DNET Par. ID 4 - ESTIMATED OUTPUT POWER (READ ONLY): In Watts (1 Watt resolution).
DNET Par. ID 5 - INPUT VOLTAGE (READ ONLY): In Volts (1 Volt resolution).
NOTE: DNET Parameters 2, 3, 4, and 5 are estimated and their accuracy depends on the accuracy of
the following parameters:
B.5.11 ACKNOWLEDGE HANDLER OBJECT - CLASS 0x2B
ATTRIBUTE ID ACCESS RULE
NAME
DATA TYPE
VALUE
1
GET
REVISION
UINT
1
2
GET
NUMBER OF
UINT
1
INSTANCES
1
GET / SET
ACKNOWLEDGE TIMER
UINT
1 to 65535 ms
2
GET / SET
RETRY LIMIT
USINT
0 to 255
3
GET
COS PRODUCING
UINT
4
CONN. INSTANCE
INSTANCE 1
ACKNOWLEDGE HANDLER CLASS ATTRIBUTES
INSTANCE 0
SERVICE
SERVICE
CODE
CLASS
INSTANCE
NAME
0x0E
YES
YES
Get_Attribute_Single
0x10
NO
YES
Set_Attribute_Single
ACKNOWLEDGE HANDLER SERVICES
IMPLEMENTED FOR