Lenze SCD Series - Manual (Page 8)

5
INPUT
HP kW VOLTAGE MODEL H W D P
10 7.5 208 / 240 SD2100F 15.59 (396) 11.14 (283) 7.65 (194) 3.60 (91)
400 / 480 SD4100F 11.59 (294) 11.14 (283) 7.65 (194) 3.60 (91)
480 / 590 SD5100F 11.59 (294) 11.14 (283) 7.65 (194) 3.60 (91)
15 11 208 / 240 SD2150F 18.09 (459) 11.14 (283) 8.29 (211) 3.60 (91)
400 / 480 SD4150F 15.59 (396) 11.14 (283) 8.29 (211) 3.60 (91)
480 / 590 SD5150F 15.59 (396) 11.14 (283) 8.29 (211) 3.60 (91)
20 15 400 / 480 SD4200F 18.09 (459) 11.14 (283) 8.29 (211) 3.60 (91)
480 / 590 SD5200F 18.09 (459) 11.14 (283) 8.29 (211) 3.60 (91)
25 18.5 400 / 480 SD4250F 28.50 (724) 10.34 (263) 8.39 (213) 3.70 (94)
480 / 590 SD5250F 28.50 (724) 10.34 (263) 8.39 (213) 3.70 (94)
SD 2 10 Y
Series:
SD = SCD Series Variable Speed AC Motor Drive with DeviceNet TM
Input Voltage:
2
4
5
= 208/240 Vac (For 208, 220, 230, and 240 Vac; 50 or 60 Hz)
= 400/480 Vac (For 380, 415, 440, 460 and 480 Vac; 50 or 60 Hz)
= 480/590 Vac (For 460, 480, 550, 575 and 600 Vac; 50 or 60 Hz)
Horsepower:
03
05
10 = ¼ Hp
= ½ Hp
= 1 Hp 15
20
30 = 1½ Hp
= 2 Hp
= 3 Hp 50
75
100
= 5 Hp
= 7½ Hp
= 10 Hp 150
200
250 = 15 Hp
= 20 Hp
= 25 Hp
Input: Phase:
Y = Single or three phase input
No character indicates three phase input only
Mounting Style:
F
F1
= Through-hole mount with special heatsink
= Through-hole mount without heatsink (customer supplies heatsink)
No character indicates panel or DIN rail mounting
Application Specific Options:
V = High Frequency Output – up to 1000 Hz
NOTE: Refer to Appendix A for mounting template dimensions for the Through-hole Mount option.
3.0 SCD MODEL DESIGNATION CODE
The SCD model number gives a full description of the basic drive unit (see example below).
EXAMPLE: SD210Y (SCD Series, 208/240 Vac, 1 HP, single or three phase input)