Lenze SCD Series - Manual (Page 67)

64
B.5.4 ASSEMBLY OBJECT - CLASS 0x04
ATTRIBUTE ID ACCESS RULE NAME DATA TYPE VALUE
1 GET REVISION UINT 2
2 GET MAXIMUM NUMBER USINT 20
OF INSTANCES
1 GET NUMBER OF MEMBER USINT
1
3 GET/SET DATA INSTANCE
DEPENDENT
ASSEMBLY CLASS ATTRIBUTES
INSTANCE 0
INSTANCES (See Below)
INSTANCE NUMBER AND NAME ACCESS RULE FOR ATTRIBUTE #3 DATA
INSTANCE 1 = BASIC CONTACTOR GET / SET
INSTANCE 2 = BASIC OVERLOAD GET / SET
INSTANCE 3 = BASIC MOTOR STARTER GET / SET
INSTANCE 4 = EXTENDED CONTACTOR GET / SET
INSTANCE 5 = EXTENDED MOTOR STARTER GET / SET
INSTANCE 20 = BASIC SPEED CONTROL GET / SET
INSTANCE 21 = EXT. SPEED CONTROL GET / SET
INSTANCE 100 = EXT. SPEED CONTROL Hz GET / SET
INSTANCE 103 = PRESET SPEED CONTROL GET / SET
INSTANCE 50 = BASIC OVERLOAD GET
INSTANCE 51 = EXTENDED OVERLOAD GET
INSTANCE 52 = BASIC MOTOR CONTROL GET
INSTANCE 53 = EXT. MOTOR CONTROL 1 GET
INSTANCE 54 = EXT. MOTOR CONTROL 2 GET
INSTANCE 70 = BASIC SPEED CONTROL GET
INSTANCE 71 = EXT. SPEED CONTROL GET
INSTANCE 101 = EXT. SPEED CONTROL Hz GET
INSTANCE 102 = CUSTOM ASSEMBLY GET
INSTANCE 104 = CUSTOM ASSEMBLY GET
INSTANCE 105 = CUSTOM ASSEMBLY GET
SERVICE SERVICE
CODE CLASS INSTANCE NAME
0x0E YES YES Get_Attribute_Single
0x05 NO YES RESET
ASSEMBLY CLASS SERVICES
IMPLEMENTED FOR