Lenze EMZ9371BC - Manual (Page 96)

7 Parameterisation 8200 vector/8200 motec
Menu structure
EDK9371BC DE/EN/FR 3.1 96
l
H1 Parametrierung 8200−9371BC_6L
Description Submenus Main menu Description
Display No. Display No.
5.18 Torque−Ctrl 2 Analog selection of torque setpoint
via analog input 1 (AIN1)
Analog selection of speed limitation
via analog input 2 (AIN2)
5.18.1 Torque setpt Torque setpoint configuration
5.18.2 f limit Speed limitation configuration
5.18.3 Motor param Motor current control and motor
monitoring configuration
5.18.4 Motor ident Motor parameter identification
5.19 Torque−Ctrl 3 Torque setpoint via AIF process data
channel (AIF−IN.W1)
Speed limitation via maximum
frequency C0011
5.19.1 Torque setpt Torque setpoint configuration
5.19.2 f limit Speed limitation configuration
5.19.3 Motor param Motor current control and motor
monitoring configuration
5.19.4 Motor ident Motor parameter identification
5.20 Torque−Ctrl 5 Operation with the system bus (CAN)
function module on FIF
Torque setpoint via process data
channel (CAN−IN1.W2)
Speed limitation via process data
channel (CAN−IN1.W3)
5.20.1 CAN managem Set up system bus (CAN)
communication
5.20.2 Torque setpt Torque setpoint configuration
5.20.3 f limit Speed limitation configuration
5.20.4 Motor param Motor current control and motor
monitoring configuration
5.20.5 Motor ident Motor parameter identification