Lenze EMZ9371BC - Manual (Page 94)

7 Parameterisation 8200 vector/8200 motec
Menu structure
EDK9371BC DE/EN/FR 3.1 94
l
H1 Parametrierung 8200−9371BC_6L
Description Submenus Main menu Description
Display No. Display No.
5.12 Vector−Ctrl 1 Frequency setpoint via parameter
channel (C0046)
5.12.1 Freq setpt Frequency setpoint configuration
5.12.2 f limit/ramp Output frequency, acceleration time
and deceleration time configuration
5.12.3 Motor param Motor current control and motor
monitoring configuration
5.12.4 Motor ident Motor parameter identification
5.13 Vector−Ctrl 3 Frequency setpoint via AIF process
data channel (AIF−IN.W1)
5.13.1 Freq setpt Frequency setpoint configuration
5.13.2 f limit/ramp Output frequency, acceleration time
and deceleration time configuration
5.13.3 Motor param Motor current control and motor
monitoring configuration
5.13.4 Motor ident Motor parameter identification
5.14 Vector−Ctrl 5 Operation with the system bus (CAN)
function module on FIF
Frequency setpoint via process data
channel (CAN−IN1.W2)
5.14.1 CAN managem Set up system bus (CAN)
communication
5.14.2 Freq setpt Frequency setpoint configuration
5.14.3 f limit/ramp Output frequency, acceleration time
and deceleration time configuration
5.14.4 Motor param Motor current control and motor
monitoring configuration
5.14.5 Motor ident Motor parameter identification