Lenze EMZ9371BC - Manual (Page 78)

7 Parameterisation 8200 vector/8200 motec
Change and save parameters
EDK9371BC DE/EN/FR 3.1 78
l
H1 Parametrierung 8200−9371BC_6L
Step Key sequence Action
1. Select menu z y Z Y Select the desired menu using the arrow
keys
2. Change to the code level Z Display of the first code in the menu
3. Select code or subcode y z Display of the current parameter value
4. Change to the parameter level V
5. Inhibit the controller if SHPRG
is displayed S The drive coasts
6. Change parameters
A Z Y Move the cursor under the digit to be
changed
B y z Change the digit
T y
T z
Quick change of digit
7. Accept the changed parameter
Display of SHPRG or SHPRG p T V Confirm the change to accept the
parameter
OK is displayed
p
is displayed
− The parameter has been accepted
immediately
8. Enable the controller if
necessary U The drive restarts
9. Change to the code level
A V The operating level is displayed
B V The code with the changed parameter is
displayed
10. Change more parameters Start again with step 1. or step 3.