Lenze EMZ9371BC - Manual (Page 83)

Parameterisation 8200 vector/8200 motec
Restoring default (as delivered) settings
7
EDK9371BC DE/EN/FR 3.1 83
l
H1 Parametrierung 8200−9371BC_6L
Restoring default (as delivered) settings
Step Key sequence Action
1. Connect the keypad to the
standard device
2. Inhibit the controller S The drive coasts
3. Select the "Load/Store"
submenu 7.1 in the "Param
managm" menu 7 z y Z Y Change to the "Load/Store" submenu
using the arrow keys
4. Change to the code level Z "Param managm" is displayed in C0002
5. Change to the parameter level V "0" and "READY" are displayed
6. Select the correct copy function The settings stored in the standard
device or in the function module are
overwritten.
l Load parameter sets (PARx) into the standard device:
– Restore the delivery
status in the selected
parameter set of the
standard device
z Load PAR1:
ð Set "1" "Keypad−>PAR1"
Load PAR2:
ð Set "2" "Keypad−>PAR2"
Load PAR3:
ð
Set "3" "Keypad−>PAR3"
Load PAR4:
ð
Set "4" "Keypad−>PAR4"
l Load the parameter set (FPAR1) into the fieldbus function module:
– Restore the delivery
status in the fieldbus
function module
z Load FPAR1
ð
Set "31" "Keypad−>FPAR1"