JUMO 14597 safetyM STB/STW Ex - Safety Temperature Limiter and Safety Temperature Monitor Operating Manual - Manual (Page 39)

6 Safety Manual
33 2013-04-01
Automatic electrical controls for household and similar use – Part 2–9: Particular requirements for temperature sensing con-
trols
- EN 61326
- DIN EN ISO 13849-1 PLe
- UL 60730-2-9
- According to the Pressure Equipment Directive
6.5 Validity of the safety manual
6.6 Connection possibilities of the sensors (SIL)
The JUMO safety
M STB/STW Ex evaluation unit is always structured in the same way. Various possibilities are available for
sensor connection. These possibilities are listed in the following table along with the achievable SIL level:
H
The evaluation described in this Safety Manual in terms of functional safety and display of certificates applies to
the specified versions of temperature monitoring units including probe versions.
Specifications that do not take the sensor system into consideration are identified as such.