Boss Audio Systems BR-900CD - Manual (Page 62)

62
Displaying the Song Information
Displaying the Remaining
Available Recording Time
Follow the procedure below to either display the elapsed
recording time in the recording standby and recording
screens.
1. Press [UTILITY].
2. Press CURSOR [ ] [ ] to move the cursor to “SYS,”
and press [ENTER].
fig.01-901d
3. Press CURSOR [ ] [ ] to select “Remain Inf,” and
turn the TIME/VALUE dial to select “ON.”
fig.01-902d
ON: Displays the remaining available recording
time in “minutes: seconds.”
OFF: Doesn’t display the remaining available
recording time.
4. Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.
* During updating, “Keep power on!” appears in the upper line
of the display, while the lower line shows what is being
processed.
* When [REC] is pressed in the Play screen, putting the BR-
900CD into record standby ([REC] flashes), the remaining
recording time is displayed in the TIME area.
fig.01-903d
Displaying the Memory Card Usage
Follow the procedure below to display the current condition
of the memory card being used.
1. Press [UTILITY].
2. Press CURSOR [ ] [ ] to move the cursor to “INF,”
and press [ENTER].
fig.01-904d
3. Press CURSOR [ ] [ ] to select the parameter to be
displayed.
Name of the currently selected song
fig.01-905d
Song’s data type and memory used (Size: MB)
fig.01-906d
Data Type
HiFi (MT2):
High-quality recording type
STD (LV1): Standard recording type
LONG (LV2): Long recording type
Remaining memory
fig.01-907d
* The song sizes are displayed in units of 1M = 1,000,000 bytes.
The size displayed is an approximation.
4. Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.