Boss Audio Systems BR-900CD - Manual (Page 110)

110
Using the Loop Effects/Track EQ
Setting the Track EQ
This section explains how to edit the Track EQ settings
(parameters).
For a fuller description of Track EQ, refer to “Track EQ
Parameter Functions” (p. 112).
Track EQ do not have “patches.” Loop effect settings are
saved along with the song data.
If you want to save the settings in the currently selected song,
hold down [STOP], and press [REC].
1. Press [PAN/EQ].
2. Press CURSOR [ ] [ ] to move the cursor to “EQ,”
and press [ENTER].
fig.01-711d
3. Use CURSOR [ ] [ ] and the TIME/VALUE dial to
set the EQ On/Off for each track.
* Pressing a REC TRACK button moves the cursor to the track
corresponding to the button pressed.
4. To change the EQ settings, press CURSOR [ ]
repeatedly to display the parameter screen, then turn
the TIME/VALUE dial to change the settings value.
fig.01-712d
5. After you have completed the setting, press [EXIT]
repeatedly to return to the Play screen