beautypg.com

172 with windows – Boss Audio Systems BR-900CD User Manual

Page 172

background image

172

With Windows

2)

Click [OK] in the “Safe To Remove Hardware”

dialog box that appears.

With Windows 2000/Me

1)

In My Computer, right-click on the “BOSS_BR-

900” icon (or “Removable disk (*:)” icon) to “Eject”

the disk.

2)

Click the

icon in the task tray, then click the

“Stop USB Disk—drive (*:)” message displayed

there.

fig.06-105a

3)

Click [OK] in the “Safe To Remove Hardware”

dialog box that appears.

7. Press BR-900CD’s [EXIT] repeatedly to return to the

Play screen.

* If you press [EXIT] without quitting the connection to the

computer, the following screens appear. In this case, pressing
[ENTER] and then [EXIT] returns the Play screen to the
display.

fig.06-106ad

At this point, you can safely disconnect the USB cable
from the BR-900CD and the computer.

8. Press [UTILITY].

9. Press CURSOR [

] [

] to move the cursor to

“TONE,” and press [ENTER].

fig.03-515d

10. Press CURSOR [

] [

] to move the cursor to

“CARD,” and press [ENTER].

The names of the WAV and AIFF files on the memory
card are displayed.

* WAV files are indicated by the symbol “.W”; “.A” indicates

AIFF files.

fig.03-516d

11. Turn the TIME/VALUE dial to select the WAV or AIFF

file with the drum sound to be loaded.

You can preview the sound of the WAV or AIFF file to be
loaded by moving the cursor to “PVW” and pressing
[ENTER].

12. Turn the TIME/VALUE dial to specify the load-

destination song drum kit.

S1–5:

Song Drum Kit 1–5

fig.03-517d

13. Turn the TIME/VALUE dial to select the load-

destination song drum sound, then press [ENTER].

The load is executed.

To cancel, press [EXIT].

fig.03-518d

* During updating, “Keep power on!” appears in the upper line

of the display, while the lower line shows what is being
processed.

* WAV and AIFF files in the TONELOAD folder are retained

without being deleted even after this procedure is completed. If
these files are no longer needed, connect the BR-900CD to
your computer via USB and use the computer to delete the
files. Any files that are retained will use the required amount
of memory on the memory card.

Task Tray

Task Bar