Boss Audio Systems BR-900CD - Manual (Page 129)

129
Creating Original Patterns
Section 4
5. Rehearse the performance by pressing the REC TRACK
[1]–[6].
You can switch the UPPER and LOWER drum sounds by
pressing [RHYTHM PAD].
* At this point, adjust Fader 1 to confirm the velocity status.
6. When you have finished rehearsing, move the cursor to
“STOP” and press [ENTER].
* You can also quit the rehearsal by pressing [STOP].
Deleting unneeded drum sounds
You can delete any drum sounds you do not need during
Realtime Recording by holding down [DELETE/MUTE] and
pressing the track buttons.
1. When you hold down [DELETE/MUTE] and press one
or more REC TRACK buttons for the tones you want to
delete.
The corresponding drum sounds are deleted for as long
as the buttons are pressed.
fig.03-410
Changing the metronome volume
1. Press [ARRANGE/PATTERN/OFF] repeatedly until the
indicator is flashing.
fig.03-411d
2. Press [EDIT].
fig.03-412d
3. Press [CURSOR] to move the cursor to “REAL,” and
press [ENTER].
“REAL” appears in REC MODE at the left of the screen.
The Recording Standby screen appears.
fig.03-413d
4. Press CURSOR [ ] repeatedly to move the cursor to
“Click.”
fig.03-414d
5. Turn the TIME/VALUE dial to adjust the metronome
volume.
Valid Settings: 0–3