18 panel descriptions – Boss Audio Systems BR-900CD User Manual
Page 18
18
Panel Descriptions
[EFFECTS]
Use this button to turn on and off the insert effects (p. 35, p.
84) or call up the screen for editing the various settings.
This button is used to make settings for the Mastering Tool
Kit.
REC/PLAY section
AUTO PUNCH
This button is used to make settings for the automatic punch
in/out function.
[ON/OFF]
This turns the auto punch-in/out function on/off. When this
is on, the button indicator will light.
[IN]
For setting the auto punch-in location. Press this button to set
the punch-in point. When set, the indicator on this button
will light. After the punch-in location is set, you can press
this button to automatically move to the punch-in location.
* Press this button while holding down [ON/OFF] to clear the
set punch-in location.
[OUT]
For setting the auto punch-out location. Press this button to
set the punch-out location at the current location in the track.
When set, the indicator on this button will light. After the
punch-out location is set, you can press this button to
automatically move to the punch-out location.
* Press this button while holding down [ON/OFF] to clear the
set punch-out location.
[LOCATOR]
Use this button to store any location that you desire. Then, by
pressing this button, you can automatically move to that
location.
When a location is set, the indicator on this button will light
and you will jump to the location each time this button is
pressed.
* Press this button while holding down AUTO PUNCH [ON/
OFF] to clear the set location.
[ZERO]
Moves you to the time location 00:00:000.0.
[REW]
The song will rewind while you hold down the button.
[FF]
The song will fast-forward while you hold down the button.
[REPEAT]
You can specify a region that you wish to hear, and hear it
repeatedly (p. 51).
This feature is useful if you want to repeatedly play back the
recording between the punch-in and out locations (p. 53)
until you are satisfied or use the phrase trainer (p. 192) to try
to copy a difficult phrase recorded from a CD or the like.
[STOP]
Stops recording or playback of the song.
[PLAY]
Plays back songs. When [REC] is pressed and the REC
indicator is flashing, press [PLAY] to start recording. During
recording or playback, the indicator on the button lights in
green.
[REC (Recording)]
This is the Record button. In addition to the Recording
operation, it is also used for manual punch-in/out. While in
recording standby, the indicator on this button flashes in red,
and during recording, it lights in red.
Track/Fader section
TRACK MIXER fader 1–6, 7/8
For controlling the volumes of each track during playback.
* Hereafter, the TRACK MIXER faders shall be referred to as
the “TRACK faders.”
RHYTHM fader
Adjusts the volume of the Rhythm.
MASTER fader
Controls the overall volume of the BR-900CD.
[V-TRACK]
Use this button to call up the screen for selecting a V-Track.
REC TRACK (Recording Track) buttons 1–6, 7/8
Use these buttons to select to which track you will record.
The button of the track selected will flash in red and then
light in red when recording begins. When recording is
finished, the button of the selected track will light alternately
in orange and green.
2
3
4