INFICON Sensistor ILS500 Leak Detection System - Manual (Page 9)

General Information 9
ninb63e1-f (1410)
1 General Information
Please read this Operating Manual carefully before putting your Sensistor ILS500 into
service. When reading, please pay particular attention to the WARNINGS, CAUTIONS
and NOTICES found throughout the text.
1.1 About This Manual
The purpose of this manual is to:
• Describe the working principles of the ILS500 and its different parts
• Show examples of different types of test stations
• Teach the reader how to set up the ILS500 for different test purposes
1.1.1 Document History
1.2 Related Manuals
Extensive information about the Leak Detector can be found in the manuals for the
Sensistor ISH2000:
• Operating Manual Sensistor ISH2000
• Technical Reference Manual Sensistor ISH2000
1.3 Introduction to the ILS500
The Sensistor ILS500 is an all-in-one Tracer Gas Leak Detection System.The purpose
of the ILS500 is to make it possible to set up a fully automatic leak test system quickly,
to a low cost.
1.3.1 Intended Use
ILS500 is designed for indoor use only.
All functions are accessible and programmable using a touch panel, a PC or via the
Internet. The test sequence is controlled by an integrated controller.
Different sets of parameters can be saved. Each set forming a specific recipe for a
specific test object.
Revision Date Remark
e 11-2013 New Tracer Gas Filler with New Hydrogen Leak Detector
f 10-2014 Updated version