INFICON Sensistor ILS500 Leak Detection System - Manual (Page 45)

Recipes 45
ninb63e1-f (1410)
9.2 Create a Recipe
9.2.1 New Recipe
1 Click Settings >> Hardware to enter the Hardware menu.
Set the correct hardware.
2 Set all ILS500 settings for the test sequence.
For more information, see on page 46.
3 Click Settings >> Recipes to enter the three Recipe Setup menus.
4 Click Save Recipe.
5 Enter a name for the recipe.
6 Click Save.
9.2.2 Modify a Recipe
1 Click Settings >> Hardware to enter the Hardware menu.
Set the correct hardware.
2 Click Settings >> Recipes >> Load Recipe.
3 Select the recipe to modify from the list and click Load.
4 Adjust the ILS500 settings to suit the new recipe.
For more information, see on page 46.
5 Click Settings >> Recipes >> Save Recipe.
6 Enter the name of the new recipe.
7 Click Save Recipe.
Delete Recipe Deletes the chosen recipe.
A new window will open.
Connect with Recipe Connects two recipes to form one test cycle.
Write the name of the recipe to be included, or
choose one from the list in Use from list.
Use from list Shows all saved recipes.
By clicking the blue button the recipe displayed is
added to Connect with recipe.
Keep Tooling in Test Step Excludes the disconnection step in the first recipe
when two recipes are connected as described
above.
Keep Pressure in Test Step Retains gas pressure between two recipes.
Import from USB Imports recipes from connected USB memory.
Export to USB Exports all recipes to a editable file on connected
USB memory.