ETC SineWave Power Module (DMX) - Manual

IES PowerModule Operators’ Manual v1.4 Isine 1
Operator Manual
Power-module
distributed dimmers
Contents:
1 Introduction ......................................................2
1.1 Product range ..........................................2
1.2 New dimmer design.................................2
1.3 Distributed dimming.................................2
1.4 Key features of itec system......................2
2 Unpacking and installation ...............................2
2.1 Unpacking & checking .............................2
2.2 Positioning ...............................................2
2.3 Connections.............................................2
2.4 Safety ......................................................3
3 Control panel layout .........................................3
4 Function overview ............................................4
4.1 Forward or reverse phase operation........4
4.2 Maximum and minimum levels ................4
4.3 Response speed......................................4
4.4 Non-dim operation ...................................4
4.5 Local control ............................................4
4.6 Dimmer curves ........................................4
4.7 Status reporting .......................................4
4.8 Backup settings .......................................4
5. Information displays and manual control .........5
6 Programming....................................................6
6.1 Flow diagram ...........................................6
6.2 General Programming Advice..................6
6.3 Front Panel Controls................................6
6.4 General controls .....................................7
6.5 DMX programming ..................................7
6.6 Serial address..........................................8
6.7 Maximum & Minimum levels ....................9
6.8 Response time.........................................9
6.9 Dimmer curves ........................................9
6.10 Non-Dim operation ..............................10
6.11 Maximum current.................................10
6.12 Voltage regulation................................11
6.13 Phase-On and Phase-Off ....................12
6.14 Start Mode ...........................................12
6.15 Passwords ..........................................13
6.16 Sleep mode .........................................13
6.17 Fault reporting .....................................13
6.18 Return to factory settings.....................14
7. DimSTAT.......................................................14
8. Fault finding...................................................15
8.1 Reported faults ......................................15
8.2 First line maintenance ...........................15
9. Specifications ................................................17
10. Declaration of conformity.............................19
11. Index ...........................................................20
12. Flow chart......................................... appendix