Jump to step, Rate & fade for the stack, Fade – ETC SmartFade v3.0.1 User Manual
Page 67: Rate, Reset rate& fade
5
Playback
61
Jump to step
It’s possible to go directly to any step of the Stack with this function.
Rate & Fade for the Stack
The RATE button can provide Rate and Fade override for the Stack. This will affect the
playback of the whole Stack temporarily. When a Rate or Fade override is cleared the
original times are retained.
Fade
Activate RATE and press STACK.
Use the wheel to set a Fade % that will scale the fade times of the whole Stack. Fade 0%
means no fade. Original fade timing is not lost and may be recovered by clearing the Fade
%.
Rate
Activate RATE and press STACK. Then hold RATE.
Use the wheel to set a Rate % that will scale the total time of the whole Stack. Original
timing is not lost and may be recovered by clearing the Rate %.
Reset Rate& Fade
Action
Console
Feedback
Activate GOTO mode
(held)
As long as the button is held, the display will
allow you to scroll to any step.
Let go of STACK to transport the whole
sequence to this step in Next - ready for the
next crossfade.
Action
Console
Feedback
1. Select Stack rate
and
The rate and fade settings for the Stack will
be selected and shown in the display.
2. Reset Rate
and
The rate and fade settings for the currently
selected stack/sequence will be reset and will
default back to its original times.
STACK
STACK
RATE
CLEAR
RATE