Edit sequences & stack, Edit the content of a step – ETC SmartFade v3.0.1 User Manual

Page 51

Edit

Edit Sequences & Stack

Sequence and Stack steps can be edited in the same way. The Stack has some extra

editing functions since there are unique Stack states and point cues, which don’t exist in

sequences. There is also a way to edit any Stack step directly, without entering the edit

menus. To delete all Sequences and the Stack

The functions available for modifying Sequence & Stack steps are Edit, Delete, Insert and

Change. For the stack there is also the option of recording up to 9 point Q’s between each

step.

Edit the content of a Step

A sequence or Stack step can contain a reference to a memory in a specific page, or a

single channel intensity. The Stack can have a unique Stack memory state as well.

Memories can be edited in the memory fader, or in the step. Steps that reference a single

intensity channel can not be edited, you have to use change instead to change to a different

single intensity channel. Unique Stack steps are edited as described, just like memories.

Step 1:

Open the Sequences menu:

Menu>[Sequences]

Step 2:

Use the wheel to select Sequence (1-24) or Stack (XF).

Press (MENU) to confirm.

Step 3:

Use the wheel to select Modify Steps.

Press (MENU) to confirm.

Step 4:

Use the wheel to select Step:#.

Press (MENU) to confirm.

Step 5:

Use the wheel to select Edit (channels can only be changed).

Press (MENU) to confirm.

Step 6:

Use the channel faders to edit the contents.

Press EDIT MEM to confirm and exit or CLEAR to abort.