ETC SmartFade v3.0.1 - Manual (Page 50)

44 SmartFade v3.0.1 User Manual
Edit Memories
Every memory can be edited blind (fader at zero) or live (fader at full). It is possible to erase
all memories at once. See “Erase Functions” on page 23.
Edit a memory
Delete a memory
To delete a single memory edit it so all intensities are at zero.
Copy a Memory
Action Console Feedback
1. Activate Edit mode All buttons with content that can be edited will
blink at full (press CLEAR to exit).
2. Select memory (change
page if necessary).
... or
...
The moment the bump button is pressed, this
memory is selected for editing. EDIT MEM
and CLEAR will blink.
3. Edit intensities Programming functions Make any changes with all normal program-
ming functions for intensities. See “Program”
on page 29. Intensities may have to be
matched by the faders before the level can be
changed.
4. End editing As soon as EDIT MEM is pressed the
changes are stored. The console will auto-
matically return to it’s previous fader mode. If
you press CLEAR instead, changes are
aborted.
Action Console Feedback
1. Activate Copy mode This button lights up. All buttons with content
will blink at full (press CLEAR to exit).
2. Select source memory
(change page if neces-
sary).
... or
...
When this button is pressed, all possible tar-
gets for this copy operation will blink. Empty
ones blink at full, occupied ones are dimmed.
3. Select target ... or
...
As soon as the button is pressed, the source
memory is recorded.
EDIT
MEM
1 24
1 48
EDIT
MEM
COPY
1 24
1 48
1 24
1 48