Tweeter, Auxiliary supply, Tweeter 4.3.3. auxiliary supply – ElmoMC SimplIQ Digital Servo Drives-Whistle Installation Guide User Manual
Page 59

Whistle and Tweeter Installation Guide
Technical Specifications
MAN-WHTWIG (Ver. 1.604)
59
4.3.2.
Tweeter
Feature
Units
3/60
2.5/100
Minimum supply voltage
VDC
7.5
12
Nominal supply voltage
VDC
50
85
Maximum supply voltage
VDC
59
95
Maximum continuous
power output
W
160
200
Efficiency at rated power (at
nominal conditions)
%
> 99
Maximum output voltage
> 95% of DC bus voltage at f=22 kHz
Auxiliary power supply
VDC
12 to 95 VDC (up to 2.5 VA inc. 5 V/200 mA for encoder)
Amplitude sinusoidal/
DC continuous current
A
3.3
2.5
Sinusoidal continuous RMS
current limit (Ic)
A
2.3
1.8
Peak current limit
A
2 x Ic
Weight
g (oz)
27 g (0.95 oz)
Dimensions
mm (in)
51 x 12.5 x 42 (2" x 0.49" x 1.65")
Digital in/Digital out/Analog in
6/2/1
Mounting method
PCB mount or soldered pins
4.3.3.
Auxiliary Supply
Feature
Details
Auxiliary power supply
Isolated DC source only
Auxiliary supply input voltage
12 VDC to 95 VDC
Auxiliary supply input power
< 2.5 VA (this includes the 5 V/200 mA load for
the main encoder only)