System architecture, How to use this guide, System architecture 2.4. how to use this guide – ElmoMC SimplIQ Digital Servo Drives-Whistle Installation Guide User Manual
Page 14
Whistle and Tweeter Installation Guide
Introduction
MAN-WHTWIG (Ver. 1.604)
14
2.3. System Architecture
Figure 1: Whistle/Tweeter System Block Diagram
2.4. How to Use this Guide
In order to install and operate your Elmo Whistle or Tweeter servo drives, you will use this
manual in conjunction with a set of Elmo documentation. Installation is your first step; after
carefully reading the safety instructions in the first chapter, the following chapters provide you
with installation instructions as follows:
•
Chapter 3, Installation
, provides step-by-step instructions for unpacking, mounting,
connecting and powering up the Whistle and Tweeter
•
Chapter 4, Technical Specifications
, lists all the drive ratings and specifications
Upon completing the instructions in this guide, your Whistle and Tweeter servo drives should
be successfully mounted and installed. From this stage, you need to consult higher-level Elmo
documentation in order to set up and fine-tune the system for optimal operation. The
following figure describes the accompanying documentation that you will require.