Revision history – ElmoMC SimplIQ Digital Servo Drives-Whistle Installation Guide User Manual
Page 3
Revision History
Version Date
Details
1.0
June 2006
Initial Release(MAN-WHTWIG.PDF)
1.01
July 2006
Correction to PT & PVT in standard models
1.02
Oct. 2006
Correction to Interpolated Analog Encoders
1.1
May 2007
Added WHI-15/60, WHI-10/100 and WHI-15/100
1.2
April 2008
Updated Power Ratings Table in Section 4.34.3
1.3
March 2009
MTCR 01-009-38: Note added to Section 3.8.3; Figure 9
updated
1.4
March 2010
MTCR 01-010-01: Figure 20updated
1.5
July 2010
MTCR 03-010-02: Updated: Sections 3.4 and 4.1.8;
Figure 31
1.6
September 2012 Formatted according to the new template
“Metronome” was replaced by the “Composer” software.
New table for 200 VDC series added.
1.601
January 2013
Updated the auxiliary voltage value
Added a caution and recommendation on the type of
cleaning solution to use for the Elmo unit.
1.602
February 2013
Whistle and Tweeter dimension details added –
Section 4.2
1.603
December 2013 General document updates
1.604
July 2014
General document update