Det-Tronics Mac - w/Supercard - Manual (Page 15)

There are seven buttons on the “Event Configurations” screen, which per-
form a variety of functions related to the event monitor. They are
described below.
Any changes to the EventsToMonitor file must be saved by selecting
“Save” from the File menu or by typing
ÁS.
Delete
This button removes all configuration information for the selected (high-
lighted) event number. The program will ask the operator to verify the
delete function before erasing the information.
Horn
Select the horn button to display the following dialog box:
This is used to activate an external alarm/event horn (e.g., a programma-
ble device-controlled horn). Normally alarms/events are determined by
logic residing in the gateway or programmable device, and the horn is
controlled from the gateway, i.e., one of the programmable fault relays.
However, it is possible that the operator may want to activate the horn
located in a PLC based on events within the OIS.
Modify
Select Modify (or double-click on an event number or name) to display
the Event Modifier screen for the selected highlighted) event. The Event
Modifier screen allows configuration of an event (see “Event
Configuration Procedure” later in this section for details).
Event Configuration Screen ( Á1)
E
VENT CONFIGURATION
S
CREEN BUTTONS
2.2
95-8434
!
A1761