Det-Tronics Mac - w/Supercard - Manual (Page 44)

The Network Utilities portion of the Point Configurations screen allows
configurations to be transferred between the OIS and the gateway(s).
Get Revision
Retrieves and displays the firmware revision number for the selected
point.
To stop this process, press “command period” ( Á.).
Holding down the option key when selecting “Get Revision” will allow
entry of a starting and ending node number allowing the revision number
of a specific group of nodes to be retrieved.
Download RTC
Select Download RTC to download the real time clock (RTC) value from
the OIS to the gateway. This synchronizes the gateway clock to the OIS
clock. In normal operation, the OIS will automatically synchronize the
gateway clock every night at midnight along with the daily log manage-
ment.
Upload RTC
Select Upload RTC to upload the real time clock (RTC) value from the cur-
rent gateway to the OIS. This allows the gateway date/time clock values
to be viewed without affecting the OIS clock. The gateway date/time
clock values appear in the Event Window along with the gateways ROM
software version number.
Download All
Once a group of points has been configured, select Download All to
sequentially download all the point configurations from the OIS to the cur-
rent gateway. Status messages appear during the download process. The
gateway will then transfer the configuration to the individual communica-
tion modules.
To stop the download procedure, press “command period” ( Á.).
Holding down the option key when selecting “Download All” will allow
entry of a starting and ending node number allowing a specific group of
nodes to be downloaded.
Network Utilities
2.31
95-8434
A1792