Det-Tronics OPECL Infrared Hydrocarbon Gas Detector - Manual (Page 29)

27 95-8556 10.1
oRdERinG infoRmation
When ordering, please refer to the OPECL Model Matrix:
alIgNmENT EqUIpmENT
part Number Description
009104-001
OPECL Alignment Telescope —
Consists of a 32mm sighting device
with 3-9x zoom magnifier that is factory
assembled with precision holder and
reflective mirror, and partial beam
block tool.
009762-002 Partial Beam Block Tool
(included with 009104-001)
aCCESSORIES
part Number Description
009296-001 Short Range Aperture kit —
Delrin plastic (included with receiver)
008987-001 Short Range Aperture kit —
Stainless Steel (optional)
009761-001 Thermal Shield for one module
(two shields required per system)
007902-002 System Test Film
(0.5–1.1 LFL-Meters signal output)
007902-003 System Test Film
(1.5–2.1 LFL-Meters signal output)
103922-001 Model 475 HART handheld communicator*
103922-002 Model 475 HART/Foundation Fieldbus
handheld communicator*
000118-010 Remote HART Port Kit
009246-001 Low Range OPECL Gas Test Cell
009246-002 High Range OPECL Gas Test Cell
*includes OPECL config software
SpaRE paRTS
part Number Description
102740-002
Calibration Magnet
005003-001 Silicone Free Grease
107427-040 O-Ring, 3.75” i.d., for wiring
compartment cover
107427-053 O-Ring, 3.25” i.d., for front flange
(internal)
007167-001 M6 Flange Bolt
009186-001 Spare Pan-Tilt Mounting Kit (for one
OPECL module only)
008925-002 Spare electronics/lamp module for
OPECL transmitter
008926-002 Spare electronics module for OPECL
receiver (relay/4-20 version)
008926-003 Spare electronics module for OPECL
receiver (EQP version)
103578-001 Anti-seize Lubricant Packet
aSSISTaNCE
For assistance in ordering a system to meet the needs
of a specific application, contact:
Detector Electronics Corporation
6901 West 110th Street
Minneapolis, Minnesota 55438 USA
Operator: (952) 941-5665 or (800) 765-FIRE
Customer Service: (952) 946-6491
Fax: (952) 829-8750
Web site: www.det-tronics.com
E-mail: [email protected]