Dakota Ultrasonics MVX - Manual (Page 21)

MVX High Performance Thickness Gauge
3.7 SETUP – Menu
Open: Displays a list of factory and user defined setups currently stored in memory.
These setups can be recalled and used at any time. Refer to page 100 for further
info.
Save: Provides the user with the ability to save a custom setup that has been
modified or created by the user. Refer to page 102 for further info.
Default Setup: Loads a basic default setup. Use only as a last resort when the
setups in the MVX have been corrupted and a computer is not accessible. Refer to
page 105 for further info.
3.8 DATA – Menu
New: Allows the user the ability to create a new alpha numeric grid with custom
parameters, rows, and columns depending on their application reporting
requirements. Refer to page 82 for further info.
Edit: Gives the user the ability to change parameters of grid that have been
previously saved. Note: Pre-defined coordinates cannot be changed once they have
been created. Refer to page 95 for further info.
Open: This function provides the user with the ability to recall grids that currently
exist in memory from a list of grids. Refer to page 97 for further info.
Delete One Grid: This function provides the user with the ability to delete one
individual grid from a list of multiple grids previously saved in memory. Refer to page
93 for further info.
Delete All Grids: This function provides the user with the ability to delete all grids
currently stored in memory. Refer to page 93 for further info.
3.9 UTIL (utilities) – Menu