Dakota Ultrasonics MVX User Manual
Page 102
Dakota Ultrasonics
98
The user may have transferred grid templates from a PC to the MVX, or setup grids
using the MVX at an earlier time. The name of the currently active grid is always
displayed at the bottom of the Hot Menu Items in measurement mode. It’s not only
important to recognize what grid is currently active, but also be able to change the
active grid at any time. The following procedures outline this process:
Changing the Active Grid
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the DATA menu is highlighted and displaying the submenu items.
2) Use the UP and DOWN arrow keys to scroll through the sub menu items
until OPEN is highlighted.
3) Press the ENTER key to display the Grid List Box.
4) Use the UP and DOWN arrow keys to scroll through the grids until the target
grid is highlighted.