chiliGREEN 12 TN120R - Manual (Page 96)

BIOS Utilities
5 - 10 Advanced Menu
5
Reset Configuration Data: (Advanced Menu)
This item is set to No as default. You can change the setting to Yes if you have in-
stalled a new add-on which has reconfigured the system, resulting in such a serious
system conflict that the operating system is unable to boot.
Legacy USB Support: (Advanced Menu)
Use this menu item to enable/disable the support for Legacy Universal Serial Bus.
Boot-time Diagnostic Screen: (Advanced Menu)
Use this menu item to enable/disable the Boot-time Diagnostic Screen. Enable this
item to display the POST screen as illustrated in
“POST Screen” on page 5 - 2 .
Power On Boot Beep (Advanced Menu)
Use this menu to enable/disable the single beep sound at the end of the POST. This
item is “Disabled” by default.
Battery Low Alarm Beep (Advanced Menu)
Use this menu item to enable/disable the battery low alarm beep.