System startup, System startup -5 – chiliGREEN 12 TN120R User Manual
Page 27
System Startup 1 - 5
Quick Start Guide
1
System Startup
1.
Remove all packing materials and place the computer on a stable surface.
2.
Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports.
3.
Attach the AC/DC adapter to the DC-In jack at the rear of the computer, then plug the AC power cord into an
outlet, and connect the AC power cord to the AC/DC adapter.
4.
Use one hand to carefully raise the lid/LCD to a comfortable viewing angle, while using the other hand (as illustrated
in
below) to support the base of the computer (Note: Never lift the computer by the lid/LCD).
5.
If you wish to operate the computer in Tablet Mode see page
.
6.
Slide the power switch to the left and then release it to turn the computer “on”.
Figure 1 - 1 - Opening the Lid/LCD/Computer with AC/DC Adapter Plugged-In
Shutdown
Note that you should always shut your computer down by choosing the Shut Down command from
the Lock Button Menu in Windows Vista. This will help prevent hard disk or system problems.