chiliGREEN 12 TN120R - Manual (Page 128)

Modules & Options
7 - 16 PC Camera Module
7
BisonCap (1.3M Cam)/VideoView (2.0M Cam)
BisonCap and VideoView are video viewers for general purpose video viewing and
testing, and capturing video files to .avi format.
1. Run the BisonCap/VideoView program from the Start > Programs/All Programs
> BisonCam/USB2.0 PC Camera menu (it is recommended that you set the cap-
ture file before the capture process - see Set Capture File below).
2. Go to the Capture menu heading (if you wish to capture audio check “PC Camera
Audio Setup (all camera modules)” on page 7 - 14 ) and select Start Capture.
3. Click OK (the file location will be displayed in the pop-up box) to start capturing the
video, and press Esc to stop the capture (you can view the file using the Windows
Media Player).
Set Capture File
Prior to capturing video files you may select the Set Capture File... option in the
File menu, and set the file name and location before capture (this will help avoid ac-
cidentally overwriting files). Set the name and location then click Open, then set the
"Capture file size:"
and click OK. You can then start the capture process as above.
Note the important information in “Reducing Video File Size” on page 7 - 17 in
order to save file space, and help prevent system problems.
Pre-Allocating File
Space
You may pre-allocate
the file size (File > Allo-
cate File Size) for the
capture file in the
BisonCap/VideoView
program.
Pre-allocating space on
the hard disk can im-
prove the capture quali-
ty (particularly of large
capture files), by reduc-
ing the amount of work
the hard disk has to do
in finding space for the
video data as it is being
captured.
See also “Reducing
Video File Size” on
page 7 - 17
.