Upgrading the hard disk drive, Upgrading the hard disk drive -4 – chiliGREEN 12 TN120R User Manual
Page 106
Upgrading The Computer
6 - 4 Upgrading the Hard Disk Drive
6
Upgrading the Hard Disk Drive
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard
disk drives with a height of 9.5mm (h) (see
). Follow your
operating system’s installation instructions, and install all necessary drivers and util-
ities (see
“Driver Installation” on page 4 - 2
), when setting up a new hard disk.
1.
Turn off the computer, and turn it over and remove the battery.
2.
Locate the hard disk bay cover and remove screws
&
.
3.
Remove the hard disk bay cover
.
HDD System
Warning
New HDD’s are blank. Be-
fore you begin make sure:
You have backed up any
data you want to keep from
your old HDD.
You have all the CD-ROMs
and FDDs required to in-
stall your operating system
and programs.
If you have access to the in-
ternet, download the latest
application and hardware
driver updates for the oper-
ating system you plan to in-
stall. Copy these to a
removable medium.
Figure 6 - 2
Removing the Hard
Disk Bay Cover
1
2
3
3
2
1