Caron 6404-4 - Manual (Page 18)

6400/6404 Series Operations Manual Page 18 of 54
Rev F 09/18/14
SECTION 4 – OPTIONAL ACCESSORY INSTALLATION
Installing the units on a Roller Base or Floor Stand
Caron offers three different configurations of roller bases and floor stands. The units are
designed to both add mobility to the incubators and to lift them up off the floor to simplify
cleaning underneath them.
Accessory RLBS401 in the figure below provides swivel casters for added mobility to
either single or stacked incubators. The two front casters have brakes which can be
securely locked once the unit is rolled to its final location.
When placing stacked units on any roller base or floor stand, lock the roller base brakes
by pressing down on them; lift a single unit onto the base first, next lift the second unit
onto the first unit. Then attach the stacking brackets as shown in the equipment
installation section of the manual.
Accessory FLST401 in the figure below provides adjustable leveling feel for increasing
the height of the incubator by approximately 8 to 10”.
This product weighs approx. 250 pounds.
Ensure that sufficient resources are available to
safely move the product.
When moving your incubator, do not lift the unit
by the door handle or the outer door as
structural damage could occur.