Caron 6404-4 - Manual (Page 13)

6400/6404 Series Operations Manual Page 13 of 54
Rev F 09/18/14
The incubator specifications were developed by testing the product in controlled
environment conditions of 72°F to 77°F degrees with a voltage fluctuation of +/-10%.
Operating the incubator outside of these specifications will affect the incubator’s
performance.
Preliminary Cleaning
Your new incubator was thoroughly cleaned prior to leaving the factory. It is
recommended however, to disinfect all interior surfaces with a general purpose
laboratory cleaning agent prior to using the product. After cleaning, dry all interior
components with a sterile cloth as necessary.
Failure to properly install the provided stacking
brackets could result in unit tipping.
Chloride containing cleaners can attack and
corrode stainless steel. Cleaners with strong
acids can damage plastic components.