Atop Technology SE5002 User manual - Manual (Page 59)

User manual Version 1.3
ABLELink
®
Ethernet Serial Server SE5002
Copyright © 2006 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
- 58 -
D3.4.9 Configure by IE
Some devices are supplied with build-in Web servers, and the user can carry out any parameter setting
directly through the submenu option Config by IE, shown as the figure below:
D3.4.10 Option
The option is mainly applied to setting some common work rules of SerialManager, such as: search for the
time interval of a network device, or whether to display any device indication and so on, shown as the figure
below:
D3.5 View
The user can select a display mode of the network device according to his/her own requirement through the
menu option "View", such as: display in sequence of device module name, or display in sequence of IP
address and so on, shown as the figure below: