Appendix b: upgrade system firmware, B.1 system upgrade procedure – Atop Technology SE5002 User manual User Manual

Page 43

User manual Version 1.3

ABLELink

Ethernet Serial Server SE5002

Appendix B: Upgrade System Firmware

New version of firmware can be downloaded from

B.1 System Upgrade Procedure

1. Make sure the PC and the SE5002 are on the same network. Use command ping or SerialManager

program to verify their availability.

2. Prepare the download tool and press any key to edit the configuration file dapdl.cfg.

3. Edit

"dapdl.cfg" to fit the system requirements, the contents of the file shall look like the following

window. Be sure to save your modifications.

Remote_IP 10.0.50.100

Load

U5002.hex

The first line identifies the IP address of SE5002; the second line identifies the firmware (.Hex file) name
to be downloaded.

4. Run

download.bat.,.

5. Input

user name and password credential to begin new firmware download.

SE5002 will automatically restart after downloading.