3 configuring virtual com ports, Configuration wizard, Fig. 39 – Atop Technology SE5002 User manual User Manual

Page 32

User manual Version 1.3

ABLELink

Ethernet Serial Server SE5002

On the right of the panel is a sample

for COM 4 settings

. On the left is the list of the COM ports that have

been selected (on Select Ports window) for use by the

Virtual COM

Redirector. Change the list by clicking

the Select Ports button.
Each COM port has its own settings. When click on a COM port, the Control Panel changes to reflect that
the selected port.
Note: COM port changes become effective immediately.

4.3 Configuring Virtual COM Ports

Serial/IP COM port can be changed as follows:(Fig. 39)

1. Select a COM port on the list.
2. On IP Address of Server, enter the serial serve IP address.
3. On Port Number, enter the TCP port number of the serial server.
4. On Server Credentials, the default is No Login Required. If the serial server does require login by the

Virtual COM Redirector, the Virtual COM Redirector must provide a username and/or password every time
an application tries to access the serial server.

5. Click the Configuration Wizard button and then click the Start button that shall appear on the wizard

window. This step verifies that the Virtual COM Redirector communicates with the serial server. If Log
display does not show errors, click Use Settings, return to the

ontrol Panel (Fig. 39)

Fig. 39. Configuration Wizard

6. Settings on the Connection Protocol must match the TCP/IP protocol supported by the serial server. The

Configuration Wizard is capable of determining the correct settings.

7. On COM Port Options, the settings must match the COM port behavior expected by the PC

application. The Configuration Wizard will recommend such settings.