Atop Technology SE5002 User manual - Manual (Page 56)

User manual Version 1.3
ABLELink
®
Ethernet Serial Server SE5002
Copyright © 2006 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
- 55 -
TCP Server mode TCP Client mode
UDP mode
3． COM port property: it mainly represents the working parameter of the serial port setting, including:
serial-port working type, baud rate, data bit, stop bit, parity bit, data packet delimiter and flow control, etc.
D3.4.3 Locate
The user can apply this function to locate a device when he knows it’s IP address, but doesn’t know its
position. If a device is selected, the device will appear with singing by which the user can locate
the device
through the submenu option Locate or clicking the Locate button on the toolbar.
D3.4.4 Reset
The device should be restarted after a successful modification of parameter configuration. And the user can
carry out a restart through the submenu option Reset.
D3.4.5 Erase Flash
Some devices are supplied to the user with a certain capacity of Flash memory to save the user's data. And
the user can erase the Flash through the submenu option Erase Flash or clicking the Erase Flash button on
the toolbar when the memory capacity is to be used up or the history data are unnecessary to be saved.