3 using tcptest.exe or tcptest2.exe sample program, Appendix a: specification, A.1. hardware specification – Atop Technology SE5002 User manual User Manual

Page 37

User manual Version 1.3

ABLELink

Ethernet Serial Server SE5002

7.2 Using SerialManager Configuration Utility Program

Use SerialManager configuration program on the product CD to check the status of SE5002. The status and
version can be read from the tool.

For example, ‘S’ means that COM1 is in server mode and is not connected.

7.3 Using TCPTEST.EXE or TCPTEST2.EXE Sample Program

Sample programs TCPTEST.EXE and TCPTEST2.EXE can be used to check the status of SE5002. Refer to
chapter 6.2 for running the sample programs.

Appendix A: Specification

A.1. Hardware Specification

Specifications

CPU

y 16-bit Embedded CPU
y 100MHz

Flash Memory

y 512K

Bytes

SDRAM

y 512K

Bytes

EEPROM

y 512

Bytes

Host Communication

y IEEE802.3 base band
y TCP/IP, UDP, SNMP, HTTP, Telnet, ARP, BOOTP, DHCP, ICMP

Reset

y Built-in default key to restore factory default settings

Watch Dog Timer

y Software watch dog to auto reset

Serial Port
Communication

y Two RS-232 or RS-485/RS-422 selectable
y RS-232: EIA-RS-232C standard, Full Duplex, DB9
y RS-485: 2/4 wires, Half/Full duplex, Terminal Block
y RS-422: 4 wires, Half/Full duplex, Terminal Block
y Parameters