Assigning a new ip address with arp command, Using virtual com, Virtual com connection diagram – Atop Technology SE5002 User manual User Manual
Page 29: Fig. 34, Sing, Irtual, Fig. 35, Lnet port 1(fig. 34)
User manual Version 1.3
ABLELink
®
Ethernet Serial Server SE5002
Copyright © 2006 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
-
28
-
Fig. 34. Assigning a new IP address with ARP command
4. U
SING
V
IRTUAL
COM
Virtual COM driver mode for windows converts COM data to LAN data for control of the COM port on
SE5002 via LAN. By creating virtual COM ports on the PC, the Virtual COM driver redirects the
communications from the virtual COM ports to an IP address and port number on a SE5002 that connects
the serial line device to the network. Fig. 35 illustrates a Virtual COM connection diagram.
Fig. 35. Virtual Com connection diagram