Atop Technology SE5002 User manual - Manual (Page 20)

User manual Version 1.3
ABLELink
®
Ethernet Serial Server SE5002
Copyright © 2006 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
- 19 -
Fig. 20. Setting packet delimiter timer
One may also choose character pattern as the packet delimiter indicated in Fig. 21
Fig. 21. Setting packet delimiter-character pattern
SE5002 also is designed to accept serial control commands directly over Ethernet following the RFC2217
format. For more detail ,contact our Technical Support.
3.3 Configuring Using Web Browser
1. Make sure the PC is on the same network as SE5002
2. Open a web browser, then Enter in the same IP address as the SE5002. The default user name is
admin and the default password is null (leave it blank).
3. The SE5002’s network, link mode and COM ports settings can be configured on different web pages.
4. Click “Save Configuration” to save settings.
5. Click ”Restart” button to initial the change.
To modify settings through the web server interface, follow the steps below.
3.3.1 Log in
1. While on the web browser, Enter in the IP address of SE5002 of the URL.
Example: http://10.0.50.100
2. The following authentication screen shall appear (Fig. 22) Enter desired user name and password then
click on OK. The default user name is admin and the default password is null(left it blank).