AirLive SNMP-FSH2602MG - Manual (Page 97)

AirLive SNMP-FSH2602MG User’s Manual
85
Filtering MAC Address
MAC address filtering allows the switch to drop unwanted traffic. Traffic is filtered based on
the destination addresses.
In this page user can add /modify /delete filter MAC address.
Add filter MAC address
Press --> key to add a filter MAC address.
MAC Address: Type the MAC address to filter.
Vlan ID: If tag-based (802.1Q) VLAN are set up on the switch, type the VID to associate
with the MAC address.
Press Ctrl+A to go back action menu line, and then select to save all configure
value.