AirLive SNMP-FSH2602MG - Manual (Page 91)

AirLive SNMP-FSH2602MG User’s Manual
79
Port Mirror Configuration
The port mirroring is a method for monitor traffic in switched networks. Traffic through ports
can be monitored by one specific port. That is traffic goes in or out monitored ports will be
duplicated into monitoring port.
Actions->
Press Space key to change configure of per item.
Select .
Sniffer Mode: Press Space key to set sniffer mode Disable、Rx、Tx or Both.
Monitoring Port: It means sniffer port can be used to see all monitors port traffic. Press
Space key to choose it.
Monitored Port: The ports you want to monitor. All monitor port traffic will be copied to
sniffer port. You can select max 25 monitor ports in the switch. User can choose which
port to monitor in only one sniffer mode. Press Space key to choose member port, “V” –
is the member, “—“ – not the member.
Press Ctrl+A go back action menu line
Select to save all configure value.
On the action menu line you can press to configure port9 ~ port26, press
return to last page.
NOTE: Only has one sniffer mode in switch at the same time.