Broadcast storm filtering, Max bridge transmit delay bound – AirLive SNMP-FSH2602MG User Manual
Page 85
AirLive SNMP-FSH2602MG User’s Manual
73
Broadcast Storm Filtering
This page is configuring broadcast storm control.
Press
Press Space key to choose the threshold value.
The valid threshold value is 5%, 10%, 15%, 20%, 25% and NO. Default is 5%.
Max bridge transmit delay bound
Max bridge transmit delay bound: Limit the packets queuing time in switch. If enabled,
the packets queued exceed will be drop. Press Space key to set the time. Those valid
values are 1sec, 2sec, 4sec and off. Default is off.
Low Queue Delay Bound: Limit the low priority packets queuing time in switch. If
enabled, the low priority packet stays in switch exceed Low Queue Max Delay Time, it
will be sent. Press Space key to enable or disable this function. Default is disable.
Low Queue Max Delay Time: To set the time that low priority packets queuing in switch.
The valid range is 1~255ms. Default Max Delay Time is 255ms.
NOTE: Make sure “Max bridge transit delay bound control” is enabled before enabling Low
Queue Delay Bound, because Low Queue Delay Bound must be work under “Max bridge
transit delay bound control” is enabled situation.