Configure your computer’s ip – AirLive SNMP-FSH2602MG User Manual
Page 27
AirLive SNMP-FSH2602MG User’s Manual
15
Configure your computer’s IP
Before accessing the switch through web browse, please follow the instruction below to
configure your computer’s IP to the same subnet as the switch. If your switch’s IP has not
been changed, it should have the following factory default value:
The switch’s Default IP
IP Address:
192.168.223.100
Subnet Mask: 255.255.248.0
Gateway:
192.168.223.254
Now if your computer’s IP is not in the same subnet as the switch, please follow the
steps below to change the computer’s IP:
Figure 4-1 Manual IP setting
Step 1:
Double click on the network connection status icon on the task bar. This should bring up a
window showing the status of the current network connection. If there is no network status
icon on the task bar, please go to the “Start -> Settings -> Network -> Local Connection” of
the task bar’s Start menu.
Step 2:
Click on the “property” icon.
Step 3:
Double click on the “Internet Protocol (TCP/IP)
Step 4:
S
S
T
T
E
E
P
P
1
1
S
S
T
T
E
E
P
P
2
2
S
S
T
T
E
E
P
P
3
3
S
S
T
T
E
E
P
P
4
4