AirLive SNMP-FSH2602MG User Manual
Page 67
AirLive SNMP-FSH2602MG User’s Manual
55
your computer’s IP to the same subnet as the switch. If your switch’s IP has not been
changed, it should have the following factory default value:
The switch’s Default IP
IP Address:
192.168.223.100
Subnet Mask: 255.255.248.0
Gateway:
192.168.223.254
Now if your computer’s IP is not in the same subnet as the switch, please follow the steps below to
change the computer’s IP:
Figure 5-1 Manual IP setting
Step 1:
Double click on the network connection status icon on the task bar. This should bring up a
window showing the status of the current network connection. If there is no network status
icon on the task bar, please go to the “Start -> Settings -> Network -> Local Connection” of
the task bar’s Start menu.
Step 2:
Click on the “property” icon.
Step 3:
Double click on the “Internet Protocol (TCP/IP)
Step 4:
Click on “Use the following IP address” button and enter the computer’s address manually.
This IP address must be on the same subnet as the switch but different from the switch’s IP.
Please make sure the IP is not used by other network device. If the switch’s IP address is
S
S
T
T
E
E
P
P
1
1
S
S
T
T
E
E
P
P
2
2
S
S
T
T
E
E
P
P
3
3
S
S
T
T
E
E
P
P
4
4