AirLive SNMP-FSH2602MG - Manual (Page 53)

AirLive SNMP-FSH2602MG User’s Manual
41
Type a name for the new VLAN.
Type a VID (between 2 to 4094). The default is 1.
Choose the protocol type.
We support 802.1v with the implementation of Port-and-Protocol-based VLAN
classification. User can combine the field “Protocol Vlan” and the field of the
port number
to form a new VLAN group.
From the Available ports box, select ports to add to the switch and click “Add >>”. If the
trunk groups exist, you can see it in here (ex: TRK1, TRK2…), and you can configure it
is the member of the VLAN or not.
Click Next. Then you can view the page as follow：
Uses this page to set the outgoing frames are VLAN-Tagged frames or no. Then click
Apply.
Tag: outgoing frames with VLAN-Tagged.
Untag: outgoing frames without VLAN-Tagged.
Port VID
Configure port VID settings
From the main Tag-based (IEEE 802.1Q) VLAN page, click Port VID Settings.