AirLive SNMP-FSH2602MG - Manual (Page 62)

AirLive SNMP-FSH2602MG User’s Manual
50
Quiet Period
： Used to define periods of time during which it will not attempt to acquire
a supplicant (Default time is 60 seconds).
Tx Period
： Used to determine when an EAPOL PDU is to be transmitted (Default
value is 30 seconds).
Supplicant Timeout
： Used to determine timeout conditions in the exchanges
between the supplicant and authentication server (Default value is 30 seconds).
Server Timeout
： Used to determine timeout conditions in the exchanges between the
authenticator and authentication server (Default value is 30 seconds).
ReAuthMax
：Used to determine the number of re-authentication attempts that are
permitted before the specific port becomes unauthorized (Default value is 2 times).
Reauth Period
： Used to determine a nonzero number of seconds between periodic
re-authentication of the supplications (Default value is 3600 seconds).
PING
This switch provides a simplified ping function for user to check whether an IP is on line or
not.
Input the IP Address and counts of ping packet to send. Press “Apply” to continue next
page